Custom ribbon mixer machine / Carbon steel Powder Mixing Machine
WLDH-300 Stainless Steel Ribbon Blender / Powder Mixing Machine is
an efficient and versatile blending machine for mixing of dry
powders, granules and viscous pastes homogeneously. It is able to
give perfect result for mixing due to the innovative design of
spiral agitator inside of its U-shape chamber.
In WLDH-300 Stainless Steel Ribbon Blender / Powder Mixing Machine,
the powder or paste moves from center to the end of container and
also from end to the center. In such a three-dimensional way, the
total powder or paste is mixed within the chamber. It asks for a
short mixing time and relatively low power consumption.
The unit consists of one electrical motor, one reduction gear,
coupling, and shaft with spiral agitator. The shaft is sealed with
bush & PTFE gland housing at both ends. Materials are loaded
from top side, and the discharge is located at the bottom side in
the center. The discharge height can be adjusted as per
requirement, so that material gets discharged into the container
below it without floating dust.
We offer several types of spiral ribbon for different sizes and
(2) Construction material
We are able to offer Ribbon Blenders with contact part to be built
by Carbon steel, SS304, SS316/316L, Titanium, Duplex stainless
steel, Hastelloy, etc. For abrasive materials we offer hardened
steel as the contact part. Also we produce Ribbon Blenders all by
stainless steel in order to meet the high hygienic requirement.
(3) Feeding & Discharging
A variety of feeding & discharging methods can be selected by
(4) Drive system
Drive system by geared motor, cycloidal reducer, worm reducer, belt
or chain transmission, etc.
(5) Heating/Cooling jacket
Jacketed trough for heating/cooling operation
(6) Vacuum drying & deaerating
The mixer can be designed for vacuum drying & deaerating for
(7) Spray nozzle
Liquid can be added into the powder by spray nozzles on the top.
(8) Extended height bases
Height of our Ribbon Blender can be defined according to customer’s
(9) Continuous operation
We can supply machines for continuous work when a large capacity
per hour is needed for the same material.
Attention: all the parameters can be customized.
1. Horizontal tube body, inner & outer dual screw with special
structure, running stable, best
quality, low noise, long life, convenient installation, widely
usage, with many kind of mixer
structure, multiple functions.
2. Whole machine except for motor is made of stainless steel.
3. With warm sheet, bearing great pressure, make easy-forming
material into difficult forming after
4. For different mixing requirements, use different screw
structure, rapid & thorough mixing.
5. There is a split window in the body for cleaning.
6. Load coefficient large, covering small surface.
Why Choose Us
1. We are the manufacturer (Not Dealer):
All machineries from Jiangyin Hallo are made by ourselves, with
lower price, good quality and assured full after service.
2. Training & Service:
1. We provide you with the prophase plan, process flow design and
manufacture equipment according to your special demand.
2. Send technicians to the jobsite for guiding the installation and
adjustment, training operators and finishing the check and accept
together with you.
3. We always keep certain inventory level of spare parts, which
means the replacements can be shipped to you right away.
3. If you are new for this business:
Many thanks for your trust; we can provide you with design scheme
for complete production lines, spot inspection and operator
training according to your demands and the conditions of applied
spot, we can help you choose the right equipments.